Motorola AP-51 series Product Reference Manual page 595

AP51xx>admin(stats)> send-cfg-ap
Description:
Copies the access point's configuration to another access point within the known AP table.
Syntax:
send-cfg-ap <index>
Example:
admin(stats)>send-cfg-ap 2
admin(stats)>
NOTE The send-cfg-ap command copies all existing configuration parameters except Mesh settings, LAN IP
data, WAN IP data and DHCP Server parameter information.
For information on copying the access point config to another access point using the applet (GUI), see
Statistics on page 7-33.
Copies the access point's configuration to the access points within the known AP table. Mesh
configuration attributes do not get copied using this command and must be configured manually.
CLI Reference Guide 8-247
Viewing Known Access Point