Motorola AP-51 series Product Reference Manual page 353

AP51xx>admin>passwd
Description:
Changes the password for the admin login.
Syntax:
passwd Changes the admin password for access point access. This requires typing the old admin password and entering a
new password and confirming it. Passwords can be up to 11 characters. The access point CLI treats the following as
invalid characters:
' " \ & $ ^ * + ? [ ( { | , < >
In order to avoid problems when using the access point CLI, these characters should be avoided.
Example:
admin>passwd
Old Admin Password:******
New Admin Password (0 - 11 characters):******
Verify Admin Password (0 - 11 characters):******
Password successfully updated
For information on configuring passwords using the applet (GUI), see Setting Passwords on page
CLI Reference Guide 8-5
6-3.