Table of Contents
Advertisement
PREPARATION BEFORE OPERATION
I Indoor Unit
1
Connect the power supply cord to an independent
power supply.
5
HOW TO OPERATE
3
2
5
I To start the operation
• Press 1.
• POWER indicator (green) on the indoor unit
will light up.
• To stop, press once more.
I Setting Mode
• Press 2 to select:-
AUTO
– Automatic Operation
HEAT
– Heating Operation
COOL
– Cooling Operation
DRY
– Soft Dry Operation
I Setting Temperature
• Press 3 to increase or decrease the temperature.
• The temperature can be set between 16°C ~ 30°C.
• Recommended temperature:
1
4
6
• During AUTO Operation, press 3 to select:-
• Operation with 2°C higher than the standard
temperature.
• Operation with the standard temperature.
• Operation with 2°C lower than the standard
temperature.
G Standard Temperature
Indoor
temperature
25°C
21°C
• At the beginning of the automatic operation, Heating,
Cooling or Soft Dry is automatically selected according
to the indoor temperature.
• After the operation mode has been selected, the
mode does not change.
COOL
26°C ~ 28°C
1°C ~ 2°C
DRY
lower than the
room temperature
HEAT
20°C ~ 24°C
Standard
Operation
temperature
Cooling
27°C
Soft Dry
24°C
Heating
22°C
Advertisement
Table of Contents
