Toshiba Satellite L300D Maintenance Manual page 98

3.5 System Test
6. ACPI Test
Subtest 03 FAN Speed Test
1. CPU Fan Speed Test
¡ ¢ £ ¤ ¤ ¥ ¢ £ ¦ § ¨ ¨ ©
Downloaded from LpManual.com Manuals
This test item is to check:
1. Whether the current system supports Plug-n-Play;
2. Whether there is an ESCD (Extended System Configuration Data) in
the BIOS;
3. Whether there is PCI-to-ISA bridge in the system;
4. Whether there is PCI bus in the system.
ACPI test includes two sub-items as below:
System Address Map Test: Check the correctness of ACPI system memory
map, and whether its mapping scope is within real memory.
ACPI Table Test: Check the correctness of ACPI relative configuration
tables in the current system.
This test item is to check whether the CPU fan currently used works
normally in the different speeds of stop, slow, middle and fast. Below is the
parameter setting dialog window.
Set the range of Speed that is to be tested, then choose the OK button to
test it. It will be displayed as follows:
¡ ¢ £ ¤ ¤ ¥ ¢ £    ¦ § ¨ ¨ ©


 ¦ § ¨ ¨ ©
 ! " ¦ § ¨ ¨
      
3 Diagnostic Programs
© # $ % & ' ( & $ & ) ( # $ & 0 $ 1
33