3 Diagnostic Programs
3.3.6 LOG Parameters Setting
You can access the Log Parameters screen through Service Diagnostics\Options -
Generate Report.
Report Destination
•
If selecting 'NONE', no log file will be generated; if selecting 'FILE', a log file with
the name specified in 'Log File Name' will be generated.
Log Options
•
Log Errors
Log Test Activities
Log Test Start Time
Log Test End Time
Log Errors Only
Log Errors Only with Time
¡ ¢ £ ¤ ¤ ¥ ¢ £ ¦ § ¨ ¨ ©
22
Downloaded from LpManual.com Manuals
If selecting this parameter, errors will be recorded when the test fails.
If selecting this parameter, the subtest results will be recorded.
If selecting this parameter, the start time of the test will be recorded.
If selecting this parameter, the end time of the test will be recorded.
If selecting this parameter, errors will be recorded only when the test fails.
¡ ¢ £ ¤ ¤ ¥ ¢ £ ¦ § ¨ ¨ ©
¦ § ¨ ¨ ©
! " ¦ § ¨ ¨
3.3Option
© # $ % & ' ( & $ & ) ( # $ & 0 $ 1