Client Data Usage - Cradlepoint mbr1200 User Manual

User Manual / MBR1200B 5/3/16
Site Survey
This is a list of WiFi networks that the router can currently find, along with information about the network
such as its mode and channel. Click "Refresh" if a WiFi network you want to connect to is not listed. You can
sort the list based on any of the fields by clicking on the field name.
If you import a network from Site Survey, most of the information about the network will already be
completed. You need to input the password (if there is one) and then click submit to save the WiFi as WAN
profile.
Wireless Scan Settings
Scan Interval: How often WiFi as WAN scans the environment for updates. (Default: 60 seconds. Range: 5–3600
seconds.)
Scan While Connected: Continue to scan for WiFi as WAN profile updates when connected. Each time a scan
occurs the wireless communication of the router will be temporarily interrupted. Normally this should be
disabled.

CLIENT DATA USAGE

Client Data Usage displays upload and download
traffic for each LAN client. Click Enable Client Data
Usage Monitoring Service to begin tracking this
information. This data is not retained between
router reboots.
For each client this shows: Name, IP address, MAC
address, amount of data uploaded (MB), amount of
data downloaded (MB), and when traffic was last
sent or received for that client ("Last Traffic").
The names that are shown are received during a DHCP exchange. If a client disconnects and reconnects with a
new IP address there will be an additional entry in this list.
Pressing Reset Statistics will restart all counters at 0.
©2016 Cradlepoint. All Rights Reserved. | +1.855.813.3385 | cradlepoint.com 41