Olympus CAMEDIA E 10 Instructions Manual page 192

Appendix 5: Camera Error Messages (continued)
Control
Viewfinder
Panel
(No more
images can
be stored
on the
card.)
No display
No display
No display No display
No display
No display
*1
The sizes of the clusters are different on a SmartMedia and CompactFlash card, so you may not be
able to store exactly the same number of images on either card. For this reason, you may not be
able to copy all the images from a full card to the other card, even if it is completely empty. (You will
see the CARD FULL message before copying is completed.) In this case, you should delete some
images that you do not need, or for the target card use a higher capacity card.
190
Monitor Explanation
CARD FULL Card is full and you
(Card is full. cannot continue
No space for shooting.
storing more
pictures.) *1
Folder numbering has
reached 999, or file
numbering has
reached 9999, so you
cannot continue
shooting.
CARD FULL Card is full so you
cannot continue
selecting or cancelling
pictures for printing.
(Selecting pictures for
printing stores data on
the card.)
Camera interior has
No display
overheated.
PICTURE The selected picture
ERROR cannot be displayed for
playback, but be used for
other processing.
CANNOT The selected
OPEN FILE
picture cannot be
displayed for
playback, but be
used for other
processing.
The picture cannot
be displayed for
playback with this
camera.
Solution
Replace the card with a fresh card, or
delete images that you do not need,
or transfer the images to a computer,
and then delete all the images from
the card.
Replace the card with a fresh card, or
transfer the images to a computer,
and then delete all the images from
the card.
Replace the card with a fresh card, or
delete images that you do not need, or
transfer the images to a computer, and
then delete all images from the card.
Switch the camera off and allow it to
cool, and then switch the camera on
again.
Remove the card, wipe clean the
electrical contacts, insert the card and
then try again. If the message is
displayed again, the card can no
longer be used.
You may be able to use the card
again if you format it. However,
formatting the card will erase all
images stored on the card.
Select and display the picture on the
camera used to take the picture.