Olympus CAMEDIA E 10 Instructions Manual page 19

Viewfinder
Spot metering area
Indicates the area employed for spot metering
when camera is in spot metering mode
AF correct mark
64
After half-pressing
shutter button,
blinks until subject
is in focus, and then
lights when subject
is in focus. Does not
blink or light when
camera is in manual
focus mode.
Flash warning 39
Blinks to warn you that flash is
required for the shot when built-
in flash is closed (pressing the
flash button raises the built-in
flash), blinks while the flash is
charging, and lights when flash
is fully charged.
Monitor Display (During Shooting)
Pressing the INFO button repeatedly switches the information displayed at the bottom of the monitor
in this order: Information Display
Shooting distance
Displaying Image Information
AF correct mark
Flash warning
78
.
Shutter speed
Macro 42
Shooting Distance Display
68
138
Macro Aperture value
Shutter speed
AF target mark 36
Position this mark on the subject that
you want to focus.
Aperture
value 72
White balance (Displays
setting other than AUTO)
74
100, 101, 102
Display Off.
Metering mode
Exposure compensation/
Exposure level
AE Lock
White balance
Metering mode 78
Center weighted
averaging metering
Spot metering
Nothing displayed for
digital ESP metering.
Exposure compensation/
Exposure level
In the P, A, S modes
displays exposure
compensation value.
( 79)
In the M mode displays
the exposure level (the
difference between the
selected and ideal
exposure levels).
( 77)
AE (Automatic
Exposure) Lock 80
17