Taking Two-In-One Pictures - Olympus CAMEDIA C480 Zoom Advanced Manual

Taking two-in-one pictures

This function allows you to combine two
pictures taken in succession and store
them as a single picture. This way you can
enjoy having two subjects in one.
Top menu [MODE MENU]
1
Take the first picture while
observing your subject on the
monitor.
• The subject will be positioned on the left
in the combined picture.
2
Take the second picture.
• The subject will be positioned on the
right in the combined picture.
• The [BUSY] bar is displayed during
editing. After the image is saved, the
camera returns to the mode menu.
Note
• When using two-in-one pictures, panorama mode, the flash, and sequential
shooting mode are not available.
• To cancel two-in-one picture mode after the first shot has been taken, press Z.
The first shot will not be saved.
• Operating the mode dial will exit two-in-one picture mode.
• If the camera enters sleep mode after the first picture has been taken, two-in-
one picture mode will be canceled.
[CAMERA] [2 IN 1]
g"How to use the menus" (P. 16)
Picture when played back
P
2288 1712 2288 1712
HQ HQ
P
2288 1712 2288 1712
HQ HQ
Picture when shooting
4
1st
5
2nd
5
51