Samsung NS100SSXEA Service Manual page 57

Troubleshooting
Operation method
■Step 27
Method)
If the steps 1 to 26 are completed, remove
the battery and insert it again to return to
the original display of remote controller.
(Operation mode/SET TEMP. /fan speed
displays.)
• If error displays, solve the problem with
reference to the right side.
◆ If you are going to use up to SEG 24, please refer to following instruction.
SEG 17 : 0 1 : Using high ceiling kit for 4way.
SEG 18 :
Change temperature display
Sound Mute
Mixed operation control
◆ If you want to use multiple functions, add each of the 'use' value of the function you want to used and input the
final addition as option value.
(Use Fahrenheit + Sound mute + Mixed operation control : 1 + 2 + 4 = 7)
Ex) 044217-1d00e6-200000-300000When using Sound mute : 044217-1d00e6-200002-300000
When using high ceiling kit for 4way and mixed operation error preventing function : 044217-1d00e6-200014-300000
4-15
NS090SDXEA_E_SM_33623A(1)_1.indd 15
Applicable button
rear side
Not in use Use
0(Celsius) 1(Fahrenheit)
0 2
0 4
Indicating state
■Error
① If the On/Off, Timer and Fan indicator
is flickering, the wrong option code
is input. Put off the power of
indoor unit and turn it on again
and then input the option code again.
If the same error occurs, it is the
EEPROM is defective or not inserted.
Replace the PCB.
② If all of On/Off, Timer, Fan and Filter
Sign indicator are flickering along with
the "Tiriring" sound, there is
option code already input which are
different from the current ones.
Check the option code and press
the button again if correct.
Option code will be input.
(Check the option code correctly.
At the time, if the same error
continues to occur, the
option code is out of input range.
Check the option code again and
repeat the step 1~26.
Samsung Electronics
2011-04-08 10:55:22