Pip Mode - Olevia LT32HVM Series User Manual

OSD-Screen

PIP mode

You may adjust setting for each Picture source. Pic 1 allows for a TV,
AV1, AV2 and DVI sources while Pic 2 supports all other input sources.
Item Adjustment
PIP Position Upper Left / Upper Right /
Lower Left / Lower Right
PIP-Pic1 TV1,AV1, AV2, DVI
PIP-Pic2 AV1, AV2, S-Video1,
S-Video2, YpbPr1, YpbPr2,
DVI, VGA
Note: Pic 1 allows for a TV, AV1, AV2 and DVI. Pic 2 allows for all
sources except TV or if you are already using one of the other sources
from Pic 1.
When you use the swap function, the signals from the main window and
the PIP window will swap positions no matter what sources you
specified on either window.
Adjusting On Screen Displays (OSD)
Function
Changes the position of Picture 2
Switches the source of Picture 1
Switches the source of Picture 2
48