Connecting To A Pc With Vga, And A Dvd Player With Dvi/Hdcp Cables - Olevia LT32HVM Series User Manual

Connecting to a PC with VGA
Connector
Disconnect all power sources before making
any connections.
1.Using a D-Sub 15 pin cable, connect the VGA
output terminal of the PC to the TV's VGA signal
input terminal.
2.You may need to use a Stereo mini jack to RCA
L/R connectors to receive audio.
Connecting to a DVD Player or HD-
Receiver with a DVI/HDCP Cable
Disconnect all power sources before making
any connections.
1.Using a DVI cable, connect the DVD's DVI output
terminal to the TV's DVI-HDCP input terminal.
2.Using an Audio cable, connect the DVD's Audio
OUT jacks to the TV's Audio IN jacks.
Note: VGA and DVI/HDCP Connectors share the
same audio input .
Note: HDCP is a copy protected digital connection
that receives analog or digital video signals from
equipment with DVI ouput that features the HDCP
function. DVI allows the transfer of digital
uncompressed data to the TV.
DVI technology is better than Component, S Video
or AV (composite) connections.
Note: DVI signal is purely digital and provides a
crystal clear technology better than component,
S-Video or Video connections. It is strongly
recommended to use this connection if you have
this function on your equipment.
TV Installation and Connection Guide
Rear of TV
VGA
DVI / HDCP
D-sub 15 pin cable
Rear of TV
VGA
DVI / HDCP
DVI cable
20
L
Service
Port
R
Red White
L
Service
Port
R
Red White
Audio cable with
stereo mini jack