Table of Contents
Advertisement
Put the cartridge down gently onto a piece of paper to prevent
5.
toner from marking your furniture and to avoid damaging the
green drum surface.
The green image drum surface at the base of the cartridge is very
delicate and light sensitive. Do not touch it and do not expose it to
normal room light for more than 5 minutes.
Repeat this removal procedure for each of the remaining image
6.
drum units.
Look into the printer to check whether any sheets of paper are
7.
visible on any part of the belt unit.
3
2
1
To remove a sheet with its leading edge at the front of
l
the belt (1), carefully lift the sheet from the belt and pull
it forwards into the internal drum cavity and withdraw
the sheet.
Do not use any sharp or abrasive objects to separate sheets from the
belt. This may damage the belt surface.
CAUTION!
CAUTION!
CLEARING PAPER JAMS > 76
4
Advertisement
Table of Contents
