Printer Menus; Viewing And Modifying Menu Settings - Oki PAGE 10i Help Manual

Printer Menus

It is possible, using the front panel buttons, to change the
default configuration of your printer to accommodate your
software application, specific paper size, method of paper
feed and interface connection.
The menu structure consists of three levels:
Category
Each category consists of several items, selected by pressing
the button (with the printer off-line). When
the required category is displayed press the
display a list of items.
Item
Each item consists of several parameters displayed on the
upper line in the message window by pressing the
button.
Parameter
The parameter will be displayed on the lower line of the
message window by pressing the left & right buttons. When
the required parameter is displayed press the
If your software can control a feature that is also controlled in the
printer menu, the software will override the menu setting. Use your
software to control printer features whenever possible.
Help Guide

Viewing and Modifying Menu Settings

Two menus are available:
1. Press
2. Enter Menu 1 or Menu 2 as required.
Menu 1 is selected by momentarily pressing and releasing
the
Menu 2 is selected by holding down the
button for at least two seconds.
3. Once the first menu category is displayed, further presses
button to
of the
category.
4. To enter a category and display an item, press the
button. The display will show the item in the top line and
the current parameter in the bottom line.
5. The current active parameter is indicated with an asterisk
To alter the parameter, press the
new parameter active, press the
parameter is displayed.
button.
6. To move on to a new item or category, press the
button. To exit the menu, press the
button.
The following tables list printer menu selections. Factory
default settings are indicated in bold type.
to place the printer off-line.
button.
button move on to the next
buttons. To make a
button when that
.
*
9