Guidelines For Transparencies And Labels; Using Recycled Print Media - Oki LED Printer User Manual

2 Lift out the support bar.
3 Insert the label sheet with print-side up.

Guidelines for Transparencies and Labels

Always use manual feed.
Always use rear output when printing transparencies
and adhesive labels.
Should be specifically made for laser printers or
photocopiers.
Must be able to withstand heat of 200 C for 0.1
second.
Labels should cover the entire carrier sheet-carrier
and adhesive must not be exposed to any part of
the printer.
Use rear paper output
and curling.

Using Recycled Print Media

Recycled paper should be restricted to 20% to 35%
Post Consumer Content and not exceed 50%. Paper
must be relatively stiff and have minimum edge curl.
Paper should be white and bright for maximum
contrast. The surface should be smooth, clean, and
stable electrically and dimensionally.
E-20
to reduce heat exposure