Invacare pronto R2 series Owner's Operator And Maintenance Manual page 44

Hide thumbs Also See for pronto R2 series:
Table of Contents

Advertisement

PROCEDURE 11
B. For PRONTO
rate decreases to a "trickle charge".
NOTE: If performing the charging procedures indepen-
dently, READ and CAREFULLY follow the individual in-
structions for each charger (supplied or purchased).
B
NOTE: If charging instructions are not supplied, consult a
A
qualified service technician for proper procedures.
T
Required Items:
T
TOOL
E
R
Battery Charger
Extension Cord
I
E
3-prong plug, 15 ampere current rating; industrial type
S
Wheelchairs Equipped With MCC-Mark IV
Joystick (Detail "A" of FIGURE 8)
1. Attach the battery charger connector to the charger
cable/battery harness.
2. Plug the charger's AC power cord, or extension, into
the grounded 120 VAC wall outlet.
3. Wait until charging is complete.
NOTE: Allow eight (8) hours for normal charging. Larger
batteries (greater than 55 ampere-hours) or severely dis-
charged batteries may require up to sixteen (16) hours to
be properly charged and equalized.
NOTE: PRONTO
R2
sixteen (16) hours and is unable to fully charge the batter-
ies, an internal timer turns the charger off and begins to
fast blink the green light.
NOTE: If the batteries need to be charged more often or
take longer to charge than normal, they may need to be
replaced. Contact an authorized dealer for service.
Wheelchairs Equipped With Mark IV RII
Joystick (Detail "B" of FIGURE 8)
1. Attach the battery charger connector to the charger
port on the FRONT of the joystick.
2. Plug the charger's AC power cord, or extension, into
the grounded 120 VAC wall outlet.
3. Wait until charging is complete.
NOTE: Allow eight (8) hours for normal charging. Larger
batteries (greater than 55 ampere-hours) or severely dis-
charged batteries may require up to sixteen (16) hours to
be properly charged and equalized.
Models - the battery charger
R2
QUANTITY
COMMENTS
1
Supplied
1
Not Supplied
ONLY - If the charger operates for
NOTE: PRONTO
ONLY - If the charger operates for
R2
sixteen (16) hours and is unable to fully charge the batter-
ies, an internal timer turns the charger off and begins to
fast blink the green light.
NOTE: If the batteries need to be charged more often or
take longer to charge than normal, they may need to be
replaced. Contact an authorized dealer for service.
DETAIL "A"
Battery Charger Connector
From Battery Charger
Three (3)
Pronged Plug
Top View
of Wheelchair
Battery Charger
Battery Charger Mount Bracket
From
Battery
Charger
DETAIL "B"
Battery Charger
Front View of
Joystick
Battery
Boxes
Charger Port
FIGURE 8 - CHARGING BATTERIES
44
BATTERIES
Charger Cable
Battery Boxes
Base Frame
Top View of Wheelchair
Three (3)
Pronged Plug
From Battery
Charger
Charger
Port
Joystick

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pronto r2-250 series

Table of Contents