Invacare pronto R2 series Owner's Operator And Maintenance Manual page 42

PROCEDURE 11
9. Install the battery box(es) into the wheelchair. Refer
to INSTALLING/REMOVING BATTERY BOX(ES) in
this procedure of the manual.
NOTE: New Battery(ies) MUST be fully charged BEFORE
using, otherwise the life of the battery(ies) will be reduced.
B
A
T
T
E
POSITIVE (+) Battery Terminal/
R
Post and Battery Clamp
I
E
Positive (+) RED
Battery Cable
S
Positive (+) RED
Battery Cable
Negative (-) BLACK
Battery Cable
Group 22NF Battery
NOTE: Battery clamps exploded away for clarification purposes only.
NEGATIVE (-) Battery
Terminal/Post
Tie-Wrap
Group 22NF Battery
CONNECTING BATTERY CABLE(S) TO BATTERY(IES) TERMINAL(S)/POST(S)
RED Battery Clamp Cover
FIGURE 6 - CONNECTING BATTERY CABLES - BATTERY CLAMP METHOD
10. If necessary, charge the battery(ies). Refer to
CHARGING BATTERIES in this procedure of the
manual.
NEGATIVE (-) Battery Terminal/
Post and Battery Clamp
Negative (-) BLACK
Battery Cable
Group 22NF Battery
Hex Screw
Mounting Plate Mounting Plate
Battery Clamp
POSITIVE (+) Battery
Terminal/Post
NEGATIVE (-) Battery Terminal/Post
DETAIL "B"
BLACK Battery Clamp Cover
42
BATTERIES
TOP VIEW
DETAIL "A"
EXPLODED
VIEW
POSITIVE (+) Battery
Terminal/Post
Tie-Wrap