Procedure 2 - Safety Inspection Checklist/Troubleshooting; Safety Inspection Checklist - Invacare pronto R2 series Owner's Operator And Maintenance Manual

PROCEDURE 2
This Procedure Includes the Following:

Safety Inspection Checklist

S
Troubleshooting
A
F
Checking Battery Charge Level
E
SAFETY INSPECTION CHECKLIST
T
Initial adjustments should be made to suit personal body structure and preference. Thereafter follow these maintenance procedures:
Y
ITEM
I
N
S
GENERAL (MECHANICAL TROUBLESHOOTING)
P
l Wheelchair rolls straight (no excessive drag or pull to one side).
E
CLOTHING GUARDS
C
l Ensure all fasteners are secure.
T
ARMS - (PROCEDURE 4)
I
l Secure but easy to release; adjustment levers engage properly.
O
l Adjustable height arms operate and lock securely.
N
FLIP BACK ARMRESTS - (PROCEDURE 4)
l Do not interfere with tires when rolling.
l Pivot points free of wear and looseness.
SEAT AND BACK UPHOLSTERY
l Inspect for rips or sagging.
CAPTAIN'S SEAT
T
l Captain's Seat is secured to the wheelchair frame.
R
l HIGH BACK CAPTAIN'S SEATS ONLY - Limit switch prevents the wheelchair
O
from operating in any recline position over 114
U
WARNING: NEVER operate the wheelchair while in any recline position
B
o
over 114 RELATIVE TO THE SEAT FRAME. If the limit switch does not
L
stop the wheelchair from operating in a recline position over 114
TIVE TO THE SEAT FRAME, do not operate the wheelchair. Have the
E
wheelchair adjusted by a qualified technician.
S
DRIVE WHEELS
H
l Axle bolts and locking tab washers are secure.
O
l No excessive side movement or binding when lifted and spun when disen-
O
gaged (free-wheeling).
T
FRONT STABILIZERS
I
l Bolts are tight.
N l Adjusted for desired ride. WARNING: MUST be adjusted by qualified technician.
G
CASTERS - (PROCEDURE 8)
l Inspect wheel/fork assembly for proper tension by spinning caster; caster
should come to a gradual stop.
l Loosen/tighten locknut if wheel wobbles noticeably or binds to a stop.
CAUTION: As with any vehicle, the wheels and tires should be checked
periodically for cracks and wear, and should be replaced.
CASTER/WHEEL/FORK/HEAD TUBE - (PROCEDURE 8)
l Ensure all fasteners are secure.
TIRES - (PROCEDURE 8)
l Inspect for flat spots and wear.
l If pneumatic tires check for proper inflation.
CAUTION: As with any vehicle, the wheels and tires should be checked
periodically for cracks and wear, and should be replaced.
BATTERIES- (PROCEDURE 11)
l Check for cracks and wear on terminal caps and battery clamp covers.
l Check that terminal caps and battery clamp covers are properly secured to
the battery terminals.
CLEANING
l Clean upholstery and armrests.
NOTE: Every six (6) months take your wheelchair to a qualified dealer for a thorough inspection and servicing. Regular cleaning will
reveal loose or worn parts and enhance the smooth operation of your wheelchair. To operate properly and safely, your wheelchair
must be cared for just like any other vehicle. Routine maintenance will extend the life and efficiency of your wheelchair.
SAFETY INSPECTION/TROUBLESHOOTING
o
RELATIVE TO THE SEAT FRAME.
o
RELA-
12
INITIALLY INSPECT/ INSPECT/
ADJUST ADJUST
WEEKLY MONTHLY
X
X
X
X
X X
X X
X
X X
X X
X
X
X X
X
X
X
X X
X X
X
X
X X
X X
X
X
X
INSPECT/
ADJUST
PERIODICALLY
X
X
X
X
X
X
X
X
X
X