Setting The Setup Password - Acer 500 User Manual

Notebook Manager

Setting the Setup Password

To set the Setup Password, follow these steps:
1. Click on the Change Setup Password button.
2. Click on the Enable Setup Password checkbox.
3. Click in the New Password textbox and type in up to
seven alphanumeric characters (A-Z, a-z, 0-9) which you
want to be your Setup Password.
4. Click in the Confirm Password textbox and retype the
password.
5. Click on OK to accept.
Note: To change a password, follow the same steps used
to set a password. To remove a password, follow the
same steps used to set a password but leave both fields
blank.
80 User's Guide