Oki C810 User Manual page 40

ITEM ACTION
System Adjust Power Save Time
Default:
Clearable Warning
Default:
Auto Continue
Default:
Manual Timeout
Default:
Wait Timeout
Default:
Low Toner
Default:
Jam Rcovery
Default:
Error Report
Default:
Print Position Adjust
Default:
Paper Black
Settings
Default:
Paper color
Settings
Default:
Trans. Black
Settings
Default:
Trans. color
Settings
Default:
SMR Setting
Default:
BG Setting
Default:
EXPLANATION
Select from 5/10/15/30/60/240 Minutes
15 (default condition indicated by *). Select by
scroll and Enter button.
Select from: ONLINE/Job (default condition
indicated by *). Select by scroll and Enter
ONLINE
button. PS job only.
Select from On/Off (default condition indicated
by *). Select by scroll and Enter button.
Off
Select from Off/30 seconds/60 seconds
(default condition indicated by *). Select by
60 scroll and Enter button.
Select from Off/5/10/20/30/40/50/60/
90/120/150/180/210/240/270/300
seconds (default condition indicated by *).
40
Select by scroll and Enter button.
Select action to take when toner sensor
indicates low toner. Select from Continue/
Stop (default condition indicated by *). Select
Continue
by scroll and Enter button.
Select from On/Off (default condition indicated
by *). Select by scroll and Enter button.
On
Select from On/Off (default condition indicated
by *). Select by scroll and Enter button.
Off
Select from X Adjust/Y Adjust/ (default
condition indicated by *). Select by scroll and
Enter button. Define measurement.
0.00
Used for fine adjustment of the black print on
-2/-1/0/+1/+2 paper.
0
Used for fine adjustment of the color print on
-2/-1/0/+1/+2 paper.
0
Used for fine adjustment of the black print on
-2/-1/0/+1/+2 transparencies.
0
Used for fine adjustment of the color print on
-2/-1/0/+1/+2 transparencies.
0
+3/+2/+1/-1/ To correct variations in print results caused by
temperature/humidity conditions and difference
-2/-3/
in print density/frequency.
0
Change the setting when print quality is
uneven.
+3/+2/+1/-1/ To correct variations in print results caused by
temperature/humility conditions and difference
-2/-3/
in print density/frequency.
0 Change the setting when background is dark.
Menu functions - C830 > 40