System Adjust Menu - Oki C 6000n User Manual

System Adjust Menu

Notes:
• Factory default settings are shown in bold.
Item
X ADJUST
Y ADJUST
DUPLEX X ADJUST
Only appears when
the option is
installed.
DUPLEX Y ADJUST
Only appears when
the option is
installed.
DRUM CLEANING
Settings
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
-2.00MILLIMETER TO
+2.00MILLIMETER
Default = 0.00
OFF
ON
C6000n User's Guide
110
Explanation
Adjusts overall print position
horizontally in 0.25
increments.
Adjusts overall print position
vertically in 0.25 increments.
Adjusts overall print position
of print face horizontally in
0.25 increments.
Adjusts overall print position
of print face vertically in 0.25
increments.
If you are experiencing
horizontal white lines on your
printed pages, enter the
menu and temporarily
change this setting to ON,
then send a one page print
job. This will cause an extra
blank sheet to print, cleaning
the drum prior to printing.
Careful! Leaving this set to
ON will reduce the image
drum life.