Install Printer Software Utilities; Activate The Duplex Unit, Internal Hard Drive And Additional Options; To Load The Manuals - Oki B6200 Series Setup Manual

INSTALL PRINTER SOFTWARE UTILITIES

With the Software Installation screen open, click the Software Utilities
button. Select and install the utilities you want following the on-screen
instructions.
To access the utility program from your desktop, click
Start → Programs → OkiData.
ACTIVATE THE DUPLEX UNIT, INTERNAL HARD DRIVE
AND ADDITIONAL OPTIONS
If your printer has an optional duplex unit, internal hard drive, compact
flash disk, additional memory, universal paper tray, or face-up rear tray
and offset catch tray (B6300 only) installed, you must enter the driver and
activate them.
From the taskbar, click Start → Settings → Printers.
1.
2. Right click the printer icon, then click Properties.
3. Select the Options/Device Settings tab.
4. Select the installed option.
5. Change setting to AVAILABLE.
6. Click Apply, OK.
If you are installing both the PCL6 and PostScript drivers, you must activate
the installed options in both drivers. For more information, see the
Reference Guide contained on the CD-ROM supplied with your printer.

TO LOAD THE MANUALS

Note: In order to open the on-line manual, you must have Acrobat Reader
installed.
1. Insert the CD into your CD-ROM drive.
2. When the Software Installation screen appears, click the
Documentation button. Then click the button for the manual you
want to load.
50 > INSTALLATION AND RELOCATION PROCEDURE
NOTE