Installing The Printer Driver; Microsoft Windows Systems; Install The Pcl6 Emulation Driver - Oki B6200 Series Setup Manual

INSTALLING THE PRINTER DRIVER

To print from the computer, install the printer driver and other required
software.
The installation procedure(s) you will use for your printer vary according
to operating system, usage of the USB port, and network connection.
Instructions for installing drivers on Windows and Macintosh operating
systems are given below. Solaris, Linux and HP-UX are dealt with in
other parts of your documentation.

MICROSOFT WINDOWS SYSTEMS

For network installation information, see the Network User Guide on the
CD-ROM. Click the Documentation/Network User's Guide buttons.

INSTALL THE PCL6 EMULATION DRIVER

1. Make sure the cable is connected to your printer and PC and your
printer is turned OFF.
2. Insert the driver CD supplied with your printer into your CD-
ROM drive. The CD will autorun. (If it doesn't, click Start →
Run → Browse. Browse to your CD-ROM drive and double-
click Install.exe, click OK.)
3. The License Agreement appears. Click Next.
4. If prompted, select your language.
5. The Software Installation screen appears. Click the Printer
Driver Installer button.
6. Click Local printer. Click Next.
7. Select the port you are using (USB or LPT1 Parallel). Click Next.
8. Select your printer model and PCL6 emulation type (the default
setting). Click Next.
9. If prompted, type a printer name for your printer. Click Next.
10. If prompted, select "do not share this printer" Click Next.
48 > INSTALLATION AND RELOCATION PROCEDURE
NOTE