Oki B6200 Series Setup Manual page 31

4. Connect the cable of the hard disk to the connector on the printer
as shown in the diagram.
When connecting the cable, hold the disk firmly by hand to prevent it from
dropping.
5. Hold the hard disk as shown in the diagram, and install it in the
printer. Align the arrow on the hard disk with the arrow on the
printer, and insert the bracket at the top of the disk into the install
position.
6. Tighten the screws on both sides of the hard disk.
7. Refer to "Closing the printer" on page
INSTALLATION AND RELOCATION PROCEDURE > 31
CAUTION!
27.