Oki B4400 Series User Manual page 57

> The Fine/Detail setting prints at 1200 x 600dpi is the
best option for printing vector objects such as graphics
and text.
> The Normal setting prints at 600 x 600dpi and is
suitable for most printing jobs.
> The Draft setting prints at 300 x 300dpi and is suitable
for printing draft documents that contain mainly text.
You can select Toner Saving to save toner for some
print jobs.
2. Page orientation can be set to either portrait (tall) or
landscape (wide). Both views can be rotated by 180
degrees.
3. You can print watermark text behind the main page
image. This is useful for marking documents as draft,
confidential, etc.
If you would like to print on special stationery, such as
forms and letterhead, but do not want to use pre-printed
stationery, you can create your own using Overlays. For
more information on "Overlays and Macros (Windows
only)" on page 71. The Overlays button also offers
guidelines on how to carry out manual duplex printing.
4. In Raster (bitmap) mode, processing of the page image is
done in the computer leaving little processing for the
printer to do, although the file size may be large. In
Vector mode, file sizes may be smaller and so
transmission over a network, for example, may be faster.
These effects are more pronounced for graphics printing
than for text printing.
5. You can select up to 999 copies to print consecutively,
although you will need to top up the paper tray during
such a long print run.
6. Your printed pages can be scaled to fit larger or smaller
stationery, within a range of 25% to 400% of the original
size.
7. A single on-screen button restores the default settings.
B4400/B4600 User's Guide – Operation > 57