Using Email Features - Panasonic VL-SVN511 SERIES Operating Instructions Manual

8.4.2 Registering your mobile device to the
main monitor
For more information about registering mobile devices,
refer to the operating instructions for the [Video
Intercom] app.
Mobile device operations
1. Start the [Video Intercom] app.
2. Read the displayed license agreement and tap
[Agree].
Main monitor operations
1. Top menu ® ®
2. Select "Register/Cancel" ®
3. Select "Register" ®
4. Select the mobile device registration number ®
.
Mobile device operations
Complete these operations within 2 minutes.
1. Read the displayed message and tap [Register].
Main monitor operations
1. Confirm that registration was completed from the
displayed message ® M
8.4.3 Cancelling the mobile device from the
main monitor
If you do not plan on using the [Video Intercom] app any
longer, we recommend cancelling the mobile device from
the main monitor.
1
Top menu ® ®
2
Select "Register/Cancel" ®
3
Select "Cancel" ®
4
Select the mobile device registration number ®
.
5
Press M N.
¯
.
.
.
¯
¯
N.
.
.
.
8. Wi-Fi, mobile devices, and email

8.5 Using email features

The main monitor can send a doorphone image via email
when someone presses the call button, and send an
email message when the sensor connected to the
doorphone is triggered.
8.5.1 Email features preparation overview
1
Connect the main monitor to your Wi-Fi network
(page 21).
2
Gather the following information.
– The email address (your email address) that you
want to use for sending email messages from the
main monitor. Note that mobile phone-exclusive
addresses cannot be used.
– The email server name (typically starts with
"SMTP") associated with the email address
– The SMTP port number used to send email
– The type of encryption used by the email server
(such as TLS/SSL, or none)
– The SMTP authentication user name and security
key used by the email server (not required for all
email servers)
3
Register the email server and notification email
addresses (page 23).
Note:
R The main monitor must be connected to a Wi-Fi
router that is connected to the Internet in order to use
email feature.
R Messages sent from the main monitor may not be
able to be received if they are treated as spam by the
destination email account. Configure the email
account so that email from the main monitor can be
received.
R Email may not be able to be sent depending on the
condition of the network.
R You can also configure email features using the
[Video Intercom] app.
8.5.2 Registering the email server
1
Top menu ® ®
2
Select "Network" ®
3
Select "Email settings" ®
4
Select "Email server registration" ®
.
5
Enter the sender email address ® select
.
6
Enter the SMTP server address ® select
.
7
Enter the port number ® select
8
Select the security type ®
.
.
.
®
®
®
.
.
23