Additional Functions; Zooming In And Out (Wide/Zoom, Pan/ Tilt); Sound And Display Settings For Calls And Monitoring; Ringtone Settings - Panasonic VL-SVN511 SERIES Operating Instructions Manual

7.1 Zooming in and out (wide/
zoom, pan/tilt)
When on a call or monitoring, you can display images in
wide mode or in zoom mode. During zoom mode, you
can change the zoom position (also called "pan/tilt").
To switch from wide mode to zoom mode
Press .
To switch from zoom mode to wide mode
Press .
To change the zoom position
Use the navigator key.
Note:
R See page 11 for examples of wide mode and zoom
mode.
R The zoom feature uses a digital zoom. As a result,
the image quality of zoomed images is lower than
wide display images.
R When images are recorded in zoom mode, only the
zoomed area is recorded.
R If you adjust these settings, the settings will be
cancelled the next time you display an image. To
change how doorphone images are initially displayed
on the main monitor, see page 11.
7.2 Sound and display settings for
calls and monitoring
While monitoring or on a call, you can press
display the options menu and change sound and display
settings.
To adjust the incoming call volume
® "Sound" ®
volume" ® adjust the volume.
To adjust the volume heard at the doorphone
® "Sound" ®
volume" ® select the desired setting.
To use the voice changer
® "Sound" ®
changer" ® select the desired setting.
R When "On" is selected, the voice heard at the
doorphone sounds deeper.
To turn off the operation guide
®
.
R While the guide is turned off, the soft keys do not
operate their respective features. Press any soft key
to display the guide again briefly. During this time, the
soft keys can be operated as normal.
To turn on the operation guide
Press any soft key to display the guide ®
.
*1
® "Receiver
*1
® "Owner's voice
*1
® "Voice
To adjust the screen brightness
® "Display" ®
® select the desired setting.
To adjust backlight compensation
® "Display" ®
compensation" ® select the desired setting.
To turn the LED lights on or off
® "Display" ®
"Illumination" ® select the desired setting.
R is displayed when the LED lights are on.
*1 These settings cannot be changed during an
incoming call.

7.3 Ringtone settings

7.3.1 Ringtone type and volume settings
You can change the ringtone type and volume that is
heard during an incoming call.
– For information about how to configure settings, see
page 18.
to
®

7. Additional functions

® "Brightness"
® "Backlight
®
17