Brother DCP-J562DW Online User's Manual page 573

Level 1
Setup Receive
Setup
AddressBook
Report Setting
Print Document
Remaining Jobs
Miscellaneous
Settings > [Network]
Level 1 Level 2
WLAN TCP/IP
Level 2 Level 3 Descriptions
Auto Reduction -
Memory Receive -
Fax Rx Stamp -
Set Speed Dial -
Setup Groups -
XMIT Report -
Journal Period -
- -
- -
TX Lock -
Distinctive -
(For some countries)
FaxAbility -
(For New Zealand
only)
Call Waiting -
(For New Zealand
only)
Level 3
BOOT Method
IP Address
Subnet Mask
Gateway
Node Name
WINS Config
WINS Server
DNS Server
APIPA
IPv6
Reduce the size of incoming faxes.
Set the machine to send faxes to your computer.
If you select PC-Fax Receive, you can turn on the Backup
Print safety feature.
Print the received time and date on the top of the received
faxes.
Store Speed Dial numbers, so you can dial by pressing only
a few buttons.
Set up Group numbers for broadcasting.
Select the initial setup for the Transmission Verification
Report.
Set the interval for automatic printing of the Fax Journal.
If you select other than Off and Every 50 Faxes, you can
set the time for the option.
If you select Every 7 Days, you can set the day of the week.
Print received faxes stored in the memory.
Check which scheduled jobs are in the memory and cancel
selected jobs.
Prohibit most functions except receiving faxes.
Use with telephone company distinctive ringing service
allows you to have a voice number and fax number on the
one phone line.
If you have FaxAbility from Telecom, use this function to
store the ringing pattern of your fax number.
And if you set in to On, you should use the registered
number only.
If you have Call Waiting service, use this function to answer
second call when you are on the phone and someone rings
you.
Descriptions
Select the BOOT method that best suits your needs.
Enter the IP address.
Enter the Subnet mask.
Enter the Gateway address.
Enter the Node name.
Select the WINS configuration mode.
Specify the IP address of the primary or secondary
WINS server.
Specify the IP address of the primary or secondary
DNS server.
Set the machine to allocate the IP address from the
link-local address range automatically.
Turn the IPv6 protocol on or off for a wireless LAN. To
use the IPv6 protocol, go to the Brother Solutions
Center at http://support.brother.com
information.
for more
567