Home >
Fax
>
Voice Operations and Fax Numbers
Send Tone Signals
Related Models: MFC-J480DW/MFC-J680DW/MFC-J880DW
If you have a Pulse dialling service, but must send Tone signals (for example, for telephone banking), follow
these steps. If you have a Touch Tone service, you will not need this feature to send tone signals.
This feature is not available in the New Zealand.
>> MFC-J480DW
>> MFC-J680DW/MFC-J880DW
MFC-J480DW
1. Press Hook.
2. Press # on the machine's control panel. Any digits dialled after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialling service.
MFC-J680DW/MFC-J880DW
1. Press
[Fax].
(MFC-J880DW)
If [Fax Preview] is set to [On], press
2. Press [Hook].
3. Press # on the machine's Touchpanel. Any digits dialled after this will send tone signals.
When you are finished with the call, the machine will return to the Pulse dialling service.
Related Information
•
Voice Operations
>
Voice Operations
[Fax] > [Sending Faxes].
> Send Tone Signals
276