Advertisement
Wipe the front grille with a clean cloth lightly
dampened with mild liquid dishwashing detergent.
Wash the cabinet with mild soap or detergent and
lukewarm water.
Air Ftiter
should be washed at least every 30
days or as often as it needs cleaning.
To remove the filter, grasp the
upper part of the inlet grille and
pull toward you. men pull the
filter up and out.
The grille frame can be removed
for more thorough cleaning or
to make the model and rating
information easier to read.
To remove tk @e fmme:
1. Grasp the upper part of the
inlet grille and pull it away
from the frame. Do the same to
the lower part of the inlet grille.
Then pull the grille straight out
and off the frame.
6
checked periodically and cleaned if clogged with dirt
or soot from the atmosphere. If extremely soiled, it
may need to be steam cleaned, a service available
through your GE service outlet.
NOTE: If the air conditioner is
can pull the lower part of the inlet
grille toward you and pull the filter
down and out.
hex washerhead screws and the
two side retaining screws that
hold the frame to the chassis.
3. ~r cleaning, replace the frame.
Use a magnetic-tipped screwdriver
to attach the frame with the four
screws removed in step 2.
Vacuum the filter on the dusty
side to remove light dust. Wash
the filter, cleaner side up, under
gently flowing water to wash out
accumulated dust and lint. If the
filter is very dirty, use a mild
household detergent in the wash
water. bt the filter dry thoroughly
before replacing it.
To repbce tie Met @e, dgn the
large tabs on the grille with the slots
on the frame and push stight on
until the grille snaps into pi=.
Advertisement
