Panasonic KX-TDA100 Getting Started page 26

4.3 Programming the PBX
Assigning the Incoming Trunk Call Destination
26 Getting Started
For analogue trunk users (DIL Setting):
1. Under CO & Incoming Call, click DIL Table & Port
Settings.
2. Confirm that the DIL tab is selected.
3. Configure the settings as required.
4. Click OK.
For ISDN trunk users (DDI Setting):
1. Under CO & Incoming Call, click DDI / DID Table.
2. Configure the settings as required.
3. Click OK.
For ISDN trunk users (MSN Setting):
1. Under CO & Incoming Call, click DIL Table & Port
Settings.
2. Click the DDI / DID / TIE / MSN tab.
3. Set the Distribution Method of the desired ports to MSN.
4. Click OK.
5. Click MSN Table.
6. Click the MSN tab.
7. Configure the settings as required.
8. Click OK.