How To Reset The Machine - Brother DCP-L8400CDN Basic User's Manual

How to reset the machine

a
Press .
b
Press All Settings.
c
Swipe up or down, or press a or b to
display Initial Setup.
d
Press Initial Setup.
e
Press Reset.
f
Press Machine Reset, Network,
All Settings or Factory Reset.
g
Do one of the following;
 To reset the settings, press Yes and
go to step h.
 To exit without making changes,
press No and go to step i.
h
You will be asked to reboot the machine.
Do one of the following;
 To reboot the machine press Yes for
2 seconds. The machine will begin
the reboot.
To exit without rebooting the

machine, press No. Go to step i.
NOTE
If you do not reboot your machine, the
reset will not finish and your settings will
remain unchanged.
i
Press .
NOTE
You can also reset the Network settings
by pressing , All Settings,
Network, Network Reset.
B
Troubleshooting
131
B