Oki OkiLAN 6120e User Manual page 142

Section 4 - Chapter 6 - Telnet Configuration
Restore to Factory Default Configuration (Option 9)
This option automatically restores the OkiLAN 6120e
to its original factory defaults. Be aware that when you
restore the OkiLAN 6120e to the original factory
default settings, only the TCP/IP protocol and output
port information is restored and your TCP/IP password
and IP address are erased.
CAUTION: Make sure that no print jobs are active
when you select Restore to Factory Defaults.
Performing this operation will restore parameters for
the TCP/IP protocol to factory defaults. If you reset
the OkiLAN 6120e while a job is printing, the job may
not print successfully.
IV - 48 OKI OkiLAN 6120e User's Guide