Advertisement
The VIZIO L37 HDTV has six different ways to connect your video equipment from a basic connection to
the most advanced for digital displays.
Best
(digital)
Best
(digital)
Left
Best
(analog)
Better
(analog)
Good
(analog)
Good
(analog)
Good
(analog)
Right
Note: For more info refer to the Quick Start Guide
Version- 02/27/06
Digital HD (HDMI - High-Definition Multime-
dia Interface) - It is the first and only
industry-supported, uncompressed, all-digital
audio/video interface. HDMI provides an
Black
interface between any audio/video source, such
as a set-top box, DVD player, or A/V receiver
and an audio and/or video monitor, such as a
digital television (DTV), over a single cable.
DTV Coaxial RF. When used for MPEG2
encoded bit streams from ATSC broadcast
Black
programming, this input takes advantage of the
High Definition content.
Analog RGB (VGA) - This video input has
seperate red, green and blue color components.
Purple
The signal carries horizontal and vertical sync
information on the green signal. This is most
commonly used for PC input
Analog HD1/HD2 (Component) - The video
signal is separated into three signals, one
containing the black-and-white information
and the other two containing the color
Green and
information.This enhancement over S-Video
Blue
takes advantage of the superior picture
provided by progressive scan DVD players and
HDTV formats.
S-Video (AV3) - The video signal is separated
into two signals, one containing the black-
and-white information and the other containing
the color information. Separating the color in
Side Panel
this way avoids 'cross color' effects where
closely spaced black and white lines are
erroneously displayed in color. It also enables
text to be displayed more sharply.
AV1/AV2/AV3 (Composite) - The complete
video signal is carried through this single pin
Yellow and
connector.This is the most commonly used
Orange
video connection.
TV Coaxial RF. This is the connection for
standard NTSC TV using antenna or cable. If
you have a VCR, you can connect your
Black
antenna/cable to the VCR RF Input and
connect the VCR RF Output to this connector.
16
VIZIO L37 HDTV User Manual
Advertisement
