Samsung Verizon 4G LTE Network Extender User Manual page 16

8
9
10
11
Verizon 4G LTE Network Extender User Guide v1.3
©Samsung
The initial startup of the Network Extender will take 30-60 minutes. During
this process, the LED will blink.
After the Network Extender successfully starts up, the LED will return to solid
blue and the display will show "In Service."
Once the Network Extender is running, check the following indicator lights:
o The GPS Indicator shows the GPS acquisition status and number of GPS
satellites currently tracked.
o The Connected Devices shows the number of devices connected to the
Network Extender with an active session.
Press the button next to the display to show additional information about your
Network Extender. The display will automatically step through the following
information: Device IP address, Network Extender MAC ID, Timing Source,
Device Name and CSG Mode.
Chapter 2 Network Extender Setup
7