Rear Panel; Figure 2-2 Rear Panel - Motorola DCT6200 Installation Manual

2-4 Overview

Rear Panel

The rear panel contains a switched power outlet; connectors for video, audio, and RF cabling;
data output; and modem and data interface connectors.
Some connectors on the rear panel are not enabled and require the support of the application
software.
Figure 2-2
Rear panel
1 2
TO
TV/VCR
CABLE
IN
Table 2-2
Rear panel connections
Key Item
1
TO
TV/VCR
2
CABLE
IN
*
3 ETHERNET
*
AUDIO IN
4 R L
5
SPDIF
6 VIDEO
IN OUT
7
8 IR
*
9
USB
DCT6200\DCT6208 Installation Manual
3 4
ETHERNET
R AUD IO IN
DVI-D OUT
IR
A UDIO OUT
TV
USB
Pass Card
8 9 10 11
Function
F-type connector used to connect the DCT* to a standard TV or VCR operating on
channel 3 or 4.
F-type connector used for the coaxial cable input from service provider (input to
integrated RF return).
Ethernet 10Base-T port supports PC networking.
RCA jacks for loop-through audio from audio equipment.
The connector is a digital output connection that carries Dolby Digital 5.1 audio
SPDIF
or PCM audio.
– RCA jack connects the DCT* to a composite (baseband) video input from
VIDEO IN
a TV, VCR, camcorder, or other video device. Not enabled at this time.
– RCA jack that delivers video to a device such as a VCR or TV. Enabled.
VIDEO OUT
AC power outlet that can be configured as a switched or unswitched outlet; and a
two-pronged plug for attaching a power cord.
Mini phono jack enabling the DCT* to control a VCR using an optional low power IR
Blaster transmitter (not all electronic program guides support this feature).
The Universal Serial Bus (USB) supports such devices as keyboards, joysticks,
scanners, disk storage, PCs, printers, and digital cameras.
5 6
VIDEO
SPDIF IN OUT
L
IEEE 1394
S-VIDEO
Pr
Y Pb
OPTICAL
SPDIF
12 13 14 15 16
7