Factory Settings - NETGEAR R6900 User Manual

Factory Settings

You can reset the router to the factory default settings that are shown in the following table.
For more information about resetting the router to its factory settings, see
Default Settings on page 193.
Table 10. R6900 router factory default settings
Feature
Router login
User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet connection
WAN MAC address
WAN MTU size
Port speed
Local network (LAN)
LAN IP address
Subnet mask
DHCP server
DHCP range
DHCP starting IP address
DHCP ending IP address
DMZ
Nighthawk AC1900 Smart WiFi Router Model R6900
Supplemental Information
Default Behavior
www.routerlogin.net (or www.routerlogin.com or
192.168.1.1)
admin
password
Use default hardware address
Determined by the protocol that is used for the Internet
connection (see Manage the MTU Size
Autosensing
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
192.168.1.2
192.168.1.254
Disabled
245
Return the Router to Its Factory
on page 47)