NETGEAR R6900 User Manual page 228

Nighthawk AC1900 Smart WiFi Router Model R6900
7. Specify a new port triggering rule with a custom service or application as described in the following
table.
Field
Service
Service Name
Service User
Service Type
Triggering Port
Inbound Connection
Connection Type
Starting Port
Description
Enter the name of the custom service or application.
From the Service User menu, select Any, or select Single address and
enter the IP address of one computer:
• Any. This is the default setting and allows any computer on the
Internet to use this service.
• Single address. Restricts the service to a particular computer. Enter
the IP address in the field that becomes available with this selection
from the menu.
Select the protocol (TCP or UDP) that is associated with the service or
application.
Enter the number of the outbound traffic port that must open the inbound
ports.
Select the protocol (TCP or UDP) that is associated with the inbound
connection.
If you are unsure, select TCP/UDP.
Enter the start port number for the inbound connection.
Manage Port Forwarding and Port Triggering
228