How To Turn On/Off The Power; Radiotelephone (Rt) Screen - Furuno FM-8900S Operator's Manual

6. REMOTE HANDSET
No. Control
11 MENU key
12 0 to 9 keys
13 CONTRAST key Short press: Opens the contrast setup screen. Press the
14 BRILL key
6.2

How to Turn On/Off the Power

A handset does not have a power key. Turn on or off the power from the transceiver
unit.
6.3

Radiotelephone (RT) Screen

Below are the radiotelephone (RT) screens on the remote handset.
1
7
Common RT screen
When no terminal has operation
rights and a remote handset is off
hook, this screen appears.
No.
1 RX signal strength (This icon does not appear while transmitting.)
2 Output power ([HI]: High, [LO]: Low)
3 Channel type ([SIMP]: Simplex, [DUP]: Duplex)
4 Spinner rotates when the equipment is functioning normally.
5 Channel region ([INT'L], [USA], [CANADA], [INLAND-W], [PRIVATE])
6 Channel
7
Loudspeaker on (
8 Volume for loudspeaker (0 to 10)
9 Squelch level (0 to 10, AUTO (Indication is [SQA].))
10 Terminal ID ([L]: Left wing handset, [R]: Right wing handset, [1] to [4]: Remote handset 1 to 4)
6-2
Opens/closes the menu.
• Enters the channel on the RT screen.
• Selects the menu items.
adjust the contrast.
Long press (more than three seconds): Restores the contrast to the de-
fault setting.
Opens the brill setup screen. Press the
can also use the BRILL key.
2 3
4
5
6
10
8 9
A remote handset can get
operation rights immediately
by hooking on then hooking
off. (The operation right
means that the terminal gets
the right to use its functions.)
) or off ( )
Function
or
DW screen
When other terminal
is operated
Meaning
or key to
key to adjust the brill. You
Scan screen