5.20
Alarm Lists
The [ALARM] menu shows all currently violated alarms. When an error occurs, a pop-
up message and a flashing error icon appear on the screen. Press the CANCEL key
to close the pop-up message and stop the flashing of the error icon. When the error is
removed, the error icon disappears.
Rotate the CHANNEL/ENTER knob to select [ALARM] on the [MENU] screen then
push the knob. The following screen appears.
All errors sent to AMS (Alert Management System) are displayed in the order of oc-
currence. An error is deleted from the list when the cause for the error is removed.
Some examples of error messages are as follows:
(014) POSITION LOST
(730) Printer Error
(210) RX PLL UNLOCK
Description text to AMS
Error icon
(013) POSITION NO UPDATE
(620) Remote HS IF error
(213) DSC PLL UNLOCK
5. MENU OPERATION
Time when the
alert occurred.
(xxx): ID number of AMS
(630) EPFS Error
(220) TX PLL UNLOCK
(340) RF AMP Heated
5-23