Sony VGC-V520G Servise Manual page 27

DISASSEMBLY
24
To Flowchart
Main baord (RF)
2
Detent
4
TOP FOR SAFETY
Nickel cloth tape
(15X40)
Harness clips
1 1
2
Speaker unit
DISASSEMBLY DISASSEMBLY FRAME HARNESS
@¢
SPEAKER UNIT (VGC-V517G/V617G)
Fix the harness at the two positions as
shown using the nickel cloth tape (IDE)
(15 x 40) and the two harness clips.
Then route the harness through the
hole of the chassis.
3 3
3 3
4
– 27 –
EXPLODED VIEW PARTS LIST
1 Disconnect the three
connectors.
2 Remove the screw and
two detent remove the
Main board (RF).
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver
3 Peel off the nickel cloth
tape (15X40) from the
harness of the speaker unit
and remove it from the two
harness clip.
4 Remove the four screws
and remove the speaker
unit.
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver