Sony VGC-V520G Servise Manual page 15
Vgc-v series vaio
Hide thumbs
Also See for VGC-V520G:
- User manual (157 pages) ,
- Service and warranty information (1 page) ,
- Supplementary manual (1 page)
Advertisement
DISASSEMBLY
12
To Flowchart
1
Support bracket
Route the harness through
the notch (2) as shown.
TOP
FOR SAFETY
3
(*2)
2
Notch
Sub chassis assy
DISASSEMBLY
DISASSEMBLY
FRAME HARNESS
3
Gasket (AY)
ENX-30 board
4
(*1)
CNX-266 board
Tape attachment positions
Gasket (P3X8X61)
Nickel cloth tape (PCMCIA)
1
Nickel cloth tape (PCMCIA)
– 15 –
EXPLODED VIEW
!™
ENX-30, CNX-266
1 Remove the
four screws.
2 Remove the harness from
the notch. Remove, by
sliding, the ENX-30 board
and CNX-266 board.
3 Remove the gasket (AY)
1
and support bracket.
4 Disconnect the connector
and remove the CNX-266
board from the ENX-30
board.
(*1) When inserting the ENX-30 board
into the CNX-266 board, repeat
pushing the ENX-30 board twice
to ensure the secure connection.
(*2) Because there is no support for
the CNX-266 board within the
encircled area, never touch this
portion to avoid any damages.
PARTS LIST
Ref. No 167
+PS (3 X 6)
4-679-053-01
Silver
.
Advertisement
