Pairing With A Different Device/Playing Audio Via Bluetooth - iHome iBT9 Instruction Manual

Pairing with a Different Device
When you power ON the speaker, it will automatically link with the previously paired Bluetooth
device as long as that device is still within range (about 33 feet). To pair with a different device,
please follow step 3 on page 9.
Playing Audio Via Bluetooth
1. Press and hold the
unit will flash blue and ascending tones will sound and the unit will search for a previously
paired device. The light will turn solid blue once a previously paired device is detected. You
can then listen to audio streamed wirelessly from your paired Bluetooth device.
2. Press the Play/Pause Button to play or pause audio.
3. Press the Play/Pause Button twice to advance to the next track. Press three times to play the previous
track or go to the start of the current track, depending on how far you are into the current track.
4. Press the – Button or + Button to adjust the volume on the unit. Press and hold for rapid volume change.
The blue LED indicator on the front of the unit will flash 3X when the volume is at maximum or minimum.
You can also adjust volume on your device.
5. When done listening, press the
device, too.
Note: Playing a Bluetooth device while an Aux-in device is playing will mute the Aux audio.
Power Button for 2 seconds to turn on the unit. The light on front of the
Power Button to turn the unit OFF. Remember to turn off your audio
10
iBT9
Using the