Whirlpool WED9290FC HybridCare Installation Instructions Manual page 24

7.
Remove hinge and latch
®
Using a T25 screwdriver, remove the 3 screws securing the
latch plate and latch backing plate and the 5 screws holding
the hinge assembly in place.
8.
Reinstall hinge and latch on
opposite sides
®
Using a T25 screwdriver, reinstall the latch plate, latch
backing plate, and hinge assembly on the opposite sides
from which they were removed.
24
Latch
Hinge
9.
Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
10.
Reinstall door on dryer
Using a T25 ® screwdriver, remove the 4 screws on the dryer.
Insert the tabs on the hinge into the mounting slot and slide
down to engage the top tab. Secure in place with the
®
4 T25 screws removed earlier.
Bottom
of door