Advertisement
Quick Links
ORDERING REPLACEMENT PARTS
If you encounter any problems with this product, or if you need to order replacement parts, contact the ICON
Health & Fitness, Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK
Tel:
08457 089 009
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
When ordering parts, please be prepared to give the following information:
• the MODEL NUMBER of the product (WEEMBE37220)
• the NAME of the product (WEIDER
234 weight bench)
®
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and the EXPLODED DRAWING in
the centre of this manual)
Part No. 191501 R1002A
Printed in China © 2002 ICON Health & Fitness, Inc.
Model No. WEEMBE37220
Serial No. ___________________
Write the serial number in the
space above for future reference.
Model
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts,
please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds
LS11 8JG
UK
csuk@iconeurope.com
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
USER'S MANUAL
Visit our website at
www.iconeurope.com
Advertisement
Related Manuals for Weider 234
Summary of Contents for Weider 234
-
Page 1: Ordering Replacement Parts
When ordering parts, please be prepared to give the following information: QUESTIONS? • the MODEL NUMBER of the product (WEEMBE37220) As a manufacturer, we are com- • the NAME of the product (WEIDER 234 weight bench) ® mitted to providing complete customer satisfaction. - Page 2 Note: A PART IDENTIFICATION CHART and a PART LIST/EXPLODED DRAWING are attached in the centre of this manual. Remove the PART IDENTIFICATION CHART and PART LIST/EXPLODED DRAWING before begin- ning assembly. WEIDER is a registered trademark of ICON Health & Fitness, Inc.
-
Page 3: Important Precautions
ATTACHING THE CURL POST IMPORTANT PRECAUTIONS For some exercises, the Curl Post (38) must be attached to the weight bench. Remove the 30mm Square Inner Cap (22) and insert the Curl Post (38) WARNING: To reduce the risk of serious injury, read the following important precautions into the Front Leg (8). -
Page 4: Before You Begin
The weight bench can be cleaned with a damp cloth and a mild, non-abrasive detergent. Do not use solvents. system, the WEIDER ® 234 weight bench will help you to achieve the specific results you want. Before reading further, please look at the drawing... - Page 5 11. Tap a 30mm Square Inner Cap (22) into each end ASSEMBLY of a Fly Arm (25). Press a 25mm Round Inner Cap (24) into the end of the weight tube. Slide a Weight Stop (28) onto the weight tube. •...
- Page 6 3. Attach the Front Leg (8) to the Frame (2) with two 7. Tap two 19mm Round Inner Caps (9) into each M8 x 40mm Carriage Bolts (41), two M8 Washers Long Pad Tube (10). Insert the Long Pad Tubes (16), and two M8 Nylon Locknuts (17).
-
Page 7: Part Identification Chart
PART IDENTIFICATION CHART REMOVE THIS PART IDENTIFICATION CHART PART LIST/EXPLODED DRAWING This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below each part refers to the key number of the part from the PART LIST in the centre of this manual. Important: Some parts may have been pre-assembled for shipping purposes. - Page 8 PART LIST—Model No. WEEMBE37220 EXPLODED DRAWING—Model No. WEEMBE37220 R1002A R1002A Key No. Qty. Description Key No. Qty. Description Upright Long Foam Pad Frame 25mm Round Inner Cap Crossbar Fly Arm Leg Lever M6 Washer Backrest Tube Short Foam Pad Backrest Weight Stop Support Rod M6 x 16mm Screw...