Toshiba QOSMIO G50 Maintenance Manual page 210

3 Tests and Diagnostics
SETUP Options
The SETUP screen is divided into 14 functionally related groups. This section describes each
group and its options.
1. Memory
This group of options displays the computer's memory.
2. System Date/Time
Sets the date and time.
3. Password
(a) User Password
(a) Supervisor Password
4. HDD Password
This option sets HDD password. HDD password is a security function to protect the
built-in HDD.
(a) HDD
3-84
Downloaded from LpManual.com Manuals
This field displays the total amount of memory installed and is automatically
calculated by the computer. You cannot change this value.
System Date
System Time
This option allows you to set or reset the user password for power on.
Registered A password has been registered.
Not Registered Change or remove the password. (Default)
This setting, which is displayed on the first page of the setup screen, allows you
to register a Supervisor Password of the computer.
Registered Supervisor Password has been registered.
Not Registered Supervisor Password has not been registered (Default).
For details on setting the password, refer to the Online Manual.
This item selects the hard disk to set HDD password.
Built-in HDD1
Built-in HDD2*
*In the case of the model equipped with two HDD
[CONFIDENTIAL]
Sets date.
Sets time.
Sets HDD password for the built-in HDD1
Sets HDD password for the built-in HDD2
QOSMIO G50 Maintenance Manual (960-683)
3.31 SETUP