Panasonic KX-TDA200 Features Manual page 230

1.19.1 Message Waiting
ON
Pattern 11
OFF
ON
Pattern 12
OFF
•
It is possible to set Message Waiting while hearing a ringback tone, busy tone, or DND tone.
•
Messages are always left on the original destination extension, regardless of that extension's FWD settings.
•
Both the extension that sent and received a message waiting notification can cancel the left message.
•
If the extension that received a notification calls back the extension that sent the notification, and the call
is answered, the notification will be cleared automatically. However, if a voice message has been left on
the VPS, whether the notification is cleared or not depends on the VPS settings.
PC Programming Manual References
3.4 [1-1] Slot—Card Property - Extension Type—
KX-TDA600 only)
4.8 [2-6-1] Numbering Plan—Main—Features—
4.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—
4.17 [2-9] System Options
→Option 3—
→Option 5—
5.22 [3-8-1] VM(DTMF) Group—System Settings—
6.1 [4-1-1] Wired Extension—Extension Settings—Option 8—
KX-TDA600 only)
6.5 [4-1-4] Wired Extension—Flexible Button—
6.13 [4-2-3] Portable Station—Flexible Button—
6.17 [4-3] DSS Console—
PT Programming Manual References
None
Feature Guide References
1.20.2 Flexible Buttons
3.1 Capacity of System Resources
User Manual References
1.2.4 When the Dialled Line is Busy or There is No Answer
1.10.5 If a Voice Processing System is Connected
230 Feature Guide
10.24 s
t
t=1.28 s
10.24 s
t
t=1.28 s
Dial Tone—Distinctive Dial Tone
SLT—Message Waiting Lamp Pattern (KX-TDA100/KX-TDA200/KX-TDA600 only)
Type
10.24 s
10.24 s
SLT Power Supply (KX-TDA100/KX-TDA200/
Message Waiting Set / Cancel / Call Back
Message Waiting Set
VM DTMF Command—Listening Message
SLT MW Mode (KX-TDA100/KX-TDA200/
Type
Type
20.48 s
20.48 s