Parallel Transmission Mode: Windows Only - Oki ES 1624n MFP User Manual

Parallel Transmission Mode: Windows Only

The parallel port supports IEEE-1284 and ECP mode. If your
computer's parallel port is not compatible with one of these modes,
the printer may not print at all or it may print corrupted data.
To correct for this, enter the printer's Parallel Menu and change the
ECP setting to Disable.
R
EADY
A
TTENTION
+
Press to enter the Menu mode.
1.
–
Press repeatedly until you see
2.
PARALLEL MENU
Press ENTER.
3.
PARALLEL
ENABLE
Press ENTER.
4.
The second line of the display starts blinking.
+
Press to change the setting to Disable.
5.
Press ENTER, then BACK to engage the setting.
6.
Press ON LINE.
7.
*
Troubleshooting • 138
B E
ACK NTER
M
ENU
O L
N INE
C
ANCEL