Cancelling The Program - Beko DE 8331 PA0 User Manual

Operating the product
C
When the Child Lock is enabled,
child lock warning indicator on
the display turns on.
C
Child lock is disabled when the
tumble drier is turned off and
turned on again by using the On/
off/program selection button.
C
Child lock is disabled when the
machine is turned off and turned
on again by using the On/off/
program selection button.
When the child lock is active:
If the position of program selection button is
changed while the tumble drier is running or
paused, indicator symbols do not change.
C
When the program selection
switch is turned while the tumble
drier is running and child lock is
active, two beeps are heard. If
the child lock is cancelled without
restoring the program selection
to switch to its previous position,
program is ended because the
position of program selection
switch is changed.
5.10 Changing the program
after starting
After the tumble drier starts running, you
may dry your laundry in a different program
by changing the selected program.
• For instance, in order to select Extra Dry
instead of Iron Dryness program, select
the Extra Dry program by turning the On/
off/program selection button.
Start the p rogram by pressing the Start/
Pause button.
Adding or removing laundry during pause
If you want to add or remove laundry after
the drying program has started:
• Put the tumble drier into Pause position
by pressing the Start/Pause button.
Drying process stops.
• Open the loading door in Pause position,
and close the door after adding or
removing laundry.
• Start the program by pressing the Start/
Pause button.
22 / EN
C
The process of adding laundry
after the start of drying process
might lead to mixing of wet
laundry with the dried laundry
inside the tumble drier and some
damp laundry at the end of
process.
C
Laundry adding and removing
process can be repeated as
many times as desired during
drying. But this process leads
to extension in the program
time and increase in energy
consumption since it will
repeatedly interrupt the
during process. Therefore, it is
recommended to add laundry
before starting the program.
C
If a new program is selected by
changing the position of program
selection button while the tumble
drier is paused, the running
program ends.
Do not contact the inner surface
of drum while adding or removing
laundry during a running program.
Surface of drum is hot.

5.11 Cancelling the program

When you want to cancel the program and
end the drying process for any reason after
the tumble drier has started operation, the
program is cancelled by turning the On/off/
program selection button.
A
WARNING: When you cancel the
program during the operation of
tumble drier, inner part will be
extremely hot; therefore, allow it
to cool down by running the airing
program.
Dryer / User Manual