JVC KW-XG701 Instructions Manual page 29

Indication
TEL
Telephone muting
SCROLL *
5
Scroll
WOOFER
Subwoofer cutoff
frequency
EXT IN *
6
External input
AUX ADJ
Auxiliary input level
adjustment
TAG DISP
Tag display
AMP GAIN
Amplifier gain control
IF BAND
Intermediate frequency
band
COLOR
Color setting
RED
GREEN
BLUE
* Some characters or symbols will not be shown correctly (or will be blanked) on the display.
5
* 6 Displayed only when one of the following sources is selected—FM, AM, DAB, CD, USB, Bluetooth, or AUX IN.
Downloaded from Caradio-Manual.com Manuals
Item Setting, [reference page]
( : Initial)
• MUTING 1/ : Select either one which mutes the sounds while using a cellular
MUTING 2 phone.
• OFF : Cancels.
• ONCE : Scrolls the track information once.
• AUTO : Repeats scrolling (at 5-second intervals).
• OFF : Cancels. (Holding DISP can scroll the display regardless of the
setting.)
• LOW : Frequencies lower than 95 Hz are sent to the subwoofer.
• MID : Frequencies lower than 140 Hz are sent to the subwoofer.
• HIGH : Frequencies lower than 185 Hz are sent to the subwoofer.
• CHANGER : To use a JVC CD changer, [19], or an Apple iPod/a JVC D. player,
[22].
• EXT IN : To use any other external component than the above, [24].
A.ADJ 00 — : Adjust the auxiliary input level accordingly, to avoid the sudden
A.ADJ 05 increase of the output level when changing the source from
external component connected to the AUX input jack on the control
panel.
• TAG ON : Shows the tag while playing MP3/WMA/AAC/WAV tracks.
• TAG OFF : Cancels.
• LOW PWR : VOL 00 – VOL 30 (Select if the maximum power of each speaker is
less than 50 W to prevent damaging the speaker.)
• HIGH PWR : VOL 00 – VOL 50
• AUTO : Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
• WIDE : Subject to interference noises from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
• DIM ON : Initial RGB: 1/1/2; Create the color to be displayed when "DIMMER"
is set to "ON."
• DIM OFF : Initial RGB:4/4/6; Create the color to be displayed when "DIMMER"
is set to "OFF."
00 – 06 : Adjust the red component of the color.
00 – 06 : Adjust the green component of the color.
00 – 06 : Adjust the blue component of the color.
Continued on the next page
SETTINGS 29